Tiling a bathroom wall where to begin can be a tricky task. In fact it can often be downright embarrassing. You see, when you’re tiling a bathroom wall you want to make sure you cover all the bases. This includes venting fans and spouts. But there are other considerations as well.
First of all you want to make sure the color you choose is going to complement the rest of your bathroom decor and not compete with it. If you have a lovely damask and white suite, don’t deck it out with lime-green tile and brown tile. It just doesn’t work. A much better choice would be to use a white or tan tile on the walls and a cream or off-white on the floors. This would allow you to bring together the colors of the walls and floors but still make them appear to be completely different themes.
The job of the tiling company you select is to make sure that the tiling you choose is sound and has the proper joint securing it. They should be able to tell you if there are any defects in the tile. If there are, they should be able to fix them. That’s one less thing you’ll have to worry about.
Another important point to remember is that bathroom counter tops vary a lot in quality and thickness. You don’t want to taffle your countertops. Also, you will need to consider your drainage system when tiling a bathroom counter top. For instance, you don’t want to use a sloped surface to install your tile. It makes the project look a little funny.
It is a good idea to buy the tiling supplies from a place that you can trust. This makes sure you are getting a good price and that the quality is known for. Ask the retailer how long the tiles have been in production. That will help you know how long the supply will last.
After selecting the tiling company you like, it’s time to start doing the work. Start by cleaning the walls with a mild cleanser and warm water. Use a sponge or cloth to wipe the area where the tiling will be placed. Make sure the water is warm. If it isn’t, the tiles will be slippery. Once the area is clean and dry, apply the tiling sealant with the sponge.
Once the tiling is applied, it’s time to do the trimming. Take the trim you want to use and cut along the tile lines you just cut. Be sure to leave extra room so you can open up the file if you want to make adjustments later on. If there is a crack in the tile, cover that with a fiberglass batting. It will add a bit of repair to the tile and make it easier to replace in the future.
Finally, tile over the repaired portion and let it dry. When it’s completely dry, trim any excess material and you’re done. Your bathroom wall will be shinier, stronger and beaming with pride.
There are other options when it comes to tiling a bathroom wall. For example, if you have a shower area but not a bathtub, you can install tile over the shower floor and then have the tub installed later. The same goes for installing a bar in the center of the room.
The first thing you want to do is to determine where you want the bathroom to go. Measure the area where you would like to install the walls and then draw a plan. Use graph paper to scale the plan to the exact size of the area you measured. This is an important part of designing a custom bathroom. It will help you determine the best tile choice for the area.
Now it’s time to choose the type of tiling. Are you going with ceramic tile or vinyl? You will have to decide this before you begin anything else. Each one has its own benefits, but each also has its drawbacks. If you’re going with a ceramic wall, be aware that this material can crack over time. Vinyl, on the other hand, is very easy to repair and can be installed much easier than ceramic tile.
So now you know the basics of designing your bathroom. You need to choose the best tile for the area, select a color that will blend in with the walls and consider the type of tiling that you’ll be using. Designing a bathroom with the right tiling can make it a beautiful place, but you have to begin somewhere. Get the bathroom wall where to begin by learning about tiling.